Table of Contents
Advertisement
l i ndab | w e s i m p li fy c on st r u ct i on
Installation instructions
2. Safety
2.1 Symbols
Carefully read this booklet before starting
up the machine.
Attention! Carefully turn off the electrical
supply before removing protection.
Attention! Risk of injury/ material damage/
damage to appliance.
Operations which may be carried out by the
user
Repairs to be carried out exclusively by an
installer or authorised technician.
Always wear work gloves.
2.2 Essential safety rules
It is dangerous to touch the appliance when wet or with
bare feet.
Do not perform any type of intervention or maintenance
without first having disconnected power to the appliance.
Do not tamper with or modify the adjustment or safety
devices unless authorised or without instructions.
Do not twist, detach or pull the power cords coming out of
the appliance even when not plugged in.
Do not pour or spray water on the appliance.
Never insert anything through the filter seat holes.
Do not remove any protection without first having
disconnected power to the appliance.
Do not throw or leave any residual packing material within
the reach of children as it is a potential risk of danger.
Do not install the appliance in explosive or corrosive
atmospheres, in moist areas, outdoors or in extremely
dusty environments.
2.3 Safety requirements
The appliance cannot be used by children or by people
with reduced capabilities, or lack of necessary
experience and knowledge without supervision or
having received instructions regarding safe use of the
appliance and understanding the hazards related to it.
Children must not play with the appliance.
Lindab reserves the right to make changes without prior notice
2022-01-28
The cleaning and maintenance to be carried out by the
user cannot be done by children without supervision.
Before performing any operation, make sure to:
1. Disconnect electric power to the appliance.
2. Close the water supply valve of the coil and let it
cool off (pre-and post-heating coils if installed as
accessories).
3. Install a circuit breaker switch in an easily accessible
position near the appliance or appliances.
RISK OF INJURY!
For safety purposes, during installation, maintenance
and repairs, abide by the following:
• Always wear work gloves.
• Do not expose to flammable gases.
RISK OF INJURY/ MATERIAL DAMAGE/
DAMAGE TO APPLIANCE!
The appliance is very heavy.
Lifting it can cause injuries.
Have another person help you lift it in order to carry the
machine.
Lift it slowly and pay attention that it does not fall.
The fans can reach a speed of 3000 rpm.
Do not insert objects or your hands into the electric fan.
Do not remove the safety labels inside the appliance. If
illegible, have them replaced.
Make sure to earth the appliance.
Always request original spare parts when replacing
components.
The installation site must be chosen so that there is
sufficient space for the connections of the air pipes and to
allow maintenance to be carried out conveniently.
Make sure there is at least 1 m of open space in front of
the appliance to allow for maintenance operations.
If the appliance is hung on a wall, make sure the wall has a
superficial mass of at least 200 kg/m2. Otherwise use a
stand to install it on the floor (optional accessory sold
separately).
Do not install the appliance near bedrooms.
To improve environmental comfort, install silencers on the
ambient air input and return piping.
The appliances cannot be installed in environments cooler
than < 12°C.
The residential ventilation systems are designed for
constant operation to avoid the formation of condensation
and mould in the environments. The units can only be
switched off for scheduled maintenance.
The appliances cannot be used to dry structures and
masonry of new homes.
ATTENTION! It is strictly forbidden to operate the unit
before having connected the 4 air ducts to the ducting
system.
RHR-CF
3
Advertisement
Table of Contents
