CD-ROMs provided with your e-pc
Your e-pc comes with a set of CD-ROMs to enable you to change or
recover your system, reinstall drivers or utilities. The CDs you receive
depend on your e-pc model. You may have either:
HP Assist CD-ROMs
•
HP Image Creation and Recovery CD-ROM / HP Image Library and
•
Diagnostics CD-ROM.
HP Assist CD-ROMs
Some e-pc models come with two HP Assist CD-ROMs (Windows 98
version) or three (Windows 2000 version):
HP Assist CD-ROM - System Recovery
One or two CDs. Use this (these) CD-ROM(s) to:
perform a full system recovery
•
HP Assist CD-ROM - Drivers & Utilities
One CD-ROM. Use this CD-ROM to:
reinstall individual device drivers or utilities
•
run e-DiagTools hardware diagnostics.
•
Using the HP Assist CD-ROMs
To use the HP Assist CD-ROMs, you must either:
boot the e-pc from the CD-ROM
•
browse the CD-ROM while the e-pc is running.
•
Performing a full system recovery or alternative OS installation
You can use the HP Assist CD-ROM - System Recovery to recover an
e-pc's factory supplied configuration by restoring the operating system
(OS), drivers and HP supplied applications. This will return the e-pc's
software configuration to a state similar to when the e-pc was originally
shipped.
CD-ROMs provided with your e-pc
31