Download Print this page

HP E-PC C10 User Manual: Regulatory Information

Hp e-pc c10: users guide.
Hide thumbs


Regulatory information

Regulatory information
According to ISO/IEC Guide 22 and CEN/CENELEC EN 45014
Manufacturer's Name:Hewlett-Packard France
Manufacturer's Address:5, avenue Raymond Chanas - Eybens - 38053 Grenoble Cedex 09 - FRANCE
Declares that the product:
Product Name: Personal Computer
Model Number: hp e-pc, e-vectra
conforms to the following Product Specifications:
International: IEC 60950:1991 +A1 +A2 +A3 +A4 / GB4943-1995
Europe: EN 60950:1992 +A1 +A2 +A3 +A4 +A11
Electromagnetic Compatibility:
CISPR 22:1993+A1+A2/ EN 55022:1994+A1+A2 Class B
EN 50082-1:1992
IEC 801-2:1991 / prEN 55024-2:1992 - 4kV CD, 8kV AD
IEC 801-3:1984 / prEN55024-3:1991 - 3V/m
IEC 801-4:1988 / prEN 55024-4:1993 - 0.5 kV Signal Lines, 1 kV Power Lines
IEC 555-2:1982+A1:1985 / EN 60555-2:1987
IEC 61000-3-3:1994 / EN 61000-3-3:1995
IEC 61000-3-2:1995 / EN 61000-3-2:1995
FCC Title 47 CFR, Part 15 Class B
ICES-003, Issue 3
AS/NZ 3548:1995
Supplementary information: The product herewith complies with the requirements of the following Directives and carries the CE-marking accordingly:
EMC Directive 89/336/EEC and Low Voltage Directive 73/23/EEC, both amended by the Directive 93/68/EEC.
The product was tested in a typical configuration with Hewlett-Packard Personal Computer Systems.
This Device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:
(1) this device may not cause harmful interference, and
(2) this device must accept any interference received, including interference that may cause undesired operation.
Grenoble, August 2000:
For Compliance Information ONLY, contact:
USA Contact: Hewlett-Packard Company,
Corporate Product Regulations Manager,
3000 Hanover Street, Palo Alto, CA 94304.
Phone: (415) 857-1501)(
Declaration of Conformity
Quality Manager



   Also See for HP E-PC C10

   Related Manuals for HP E-PC C10

This manual also for:

E-pc s10

Comments to this Manuals

Symbols: 0
Latest comments: