Installing An Expansion Board - HP Deskpro EN Supplementary Manual

Installing an
Expansion Board
The Net PC models have two PCI expansion slots 1 located on
the expansion board cage; Small Form Factor models have one
PCI/ISA combination expansion slot 2 and one PCI expansion
slot 1. Each slot can accommodate an expansion board up to
seven inches (17.8 cm) in length. To install an expansion board:
1. If you have locked the Smart Cover Lock, use Computer
Setup to unlock it.
2. Turn off the computer and any external devices.
3. Disconnect the power cord from the power outlet, then
disconnect any external devices.
4. Remove the computer cover.
5. Remove the expansion board cage and identify the slot into
which you want to insert the expansion board.
Location of Expansion Slots in the Expansion Board Cage
Guide to Features & Upgrades 3-9