Installing Drives; Removing The Bezel Blank - HP Deskpro EN Supplementary Manual

Installing Drives

Removing the Bezel Blank

Small Form Factor models have two external bays. One external
bay contains a preinstalled diskette drive that can be upgraded.
This section describes how to remove the bezel blank and install
a CD-ROM drive into the other external bay.
Net PC models have no removable media drives.
1. If you have locked the Smart Cover Lock, use Computer
Setup to unlock it.
2. Turn off the computer and any external devices.
3. Disconnect the power cord from the power outlet, and
disconnect any external devices.
4. Remove the computer cover.
5. Lay the cover top down on a protected work surface.
Squeeze the two tabs on the right side of the bezel blank.
6. Rotate the bezel blank clockwise and out of the front bezel.
To reinstall the bezel blank, reverse the procedure.
Removing the Bezel Blank (Inside View of Cover)
Guide to Features & Upgrades 3-19