Mounting The Computer; Self-Mounting Method; Bracket Mounting Method - HP Deskpro EN Supplementary Manual

Mounting the
Computer

Self-Mounting Method

Bracket Mounting Method

3-2 Upgrading the Computer
You can install the computer on, under, or beside your
workspace. There are three methods of installation: the self-
mounting method, the bracket mounting method, and the
drawer installation method.
A mounting bracket is an option available from Compaq.
The self-mounting method requires removing the system board.
Compaq recommends that you contact your authorized Compaq
dealer or service provider when using this installation.
CAUTION:
Do not mount the computer upside down when using
this procedure.
The computer may be mounted in a horizontal or vertical mode
using the mounting bracket available from Compaq. Refer to the
documentation included with the mounting bracket for complete
installation procedures.
CAUTION:
Make sure you use the correct fasteners to suit the
material to which the mounting bracket will be installed. Failure to
select the proper fasteners may result in damage to the computer.
CAUTION:
Do not mount the computer upside down when using
this procedure.