Table of Contents
Advertisement
Current CPU Temperature/Current System Temp/Current FAN1, FAN2 Speed/Vcore/
Vdd/3.3V/+5V/+12V (V)
This will show the CPU/FAN/System voltage chart and FAN Speed.
3-11 Miscellaneous Control
This section is for setting CPU Miscellaneous Control.
CMOS Setup Utility – Copyright(C) 1984-2000 Award Software
CyrixIII Clock Ratio
Auto Detect DIMM/PCI Clock
Spread Spectrum
** Current Host Clock is
Host Clock at Next Boot is
** Current DRAM Clock is
DRAM Clock at Next Boot is 66Mhz (HOST CLK)
↑↓→← Move Enter:Select Item +/-/PU/PD:Value F10:Save ESC:Exit
F5:Previous Values
Auto Detect DIMM/PCI Clock
This item allows you to enable/disable auto detect DIMM/PCI Clock.
The settings are: Enabled, Disabled.
Spread Spectrum
This item allows you to set the CPU Host/PCI clock Spread Spectrum.
The choice are: Disabled and Enabled.
Host Clock at Next Boot is
This item allows you to step by step setting CPU/HOST Frequency, USE PageDown/ PageUp
key user can change the frequency to approach overclocking.
By press PageDown/PageUp key you can change the Host clock frequency
When jumper setting
When jumper setting
When jumper setting
DRAM Clock at Next Boot is
This item allows you to select SDRAM Frequency to add or to decrease.
3-12 Load Standard/Optimized Defaults
Load Standard Defaults
Miscellaneous Control
Default
Enabled
Disabled
66Mhz **
66Mhz
66Mhz **
F6:Optimized Defaults F7:Standard Defaults
66MHz
you can choose 66∼99MHz
100MHz
you can choose 100∼132MHz
133MHz
you can choose 133∼166MHz
Menu Level >
CyrixIII CPU Ratio
Adjustment
40
Item Help
F1:General Help
Advertisement
Table of Contents
