Security Settings; Boot Settings - Supermicro SUPERSERVER 1018R-WC0R User Manual

S S
UPER ERVER 1018R-WC0R User's Manual
7-6

Security Settings

This menu allows the user to configure the following security settings for the
system.
Password Check
Select Setup for the system to check for a password at Setup. Select Always for the
system to check for a password at bootup or upon entering the BIOS Setup utility.
The options are Setup and Always.
Administrator Password
Use this feature to set the administrator password which is required to enter the
BIOS setup utility. The length of the password should be from 3 characters to 20
characters long.
7-38
7-7

Boot Settings

Use this feature to configure Boot Settings:
Setup Prompt Timeout
Use this item to indicate the length of time (the number of seconds) for the BIOS to
wait before rebooting the system when the setup activation key is pressed. Enter the
value of 65535 (0xFFFF) for the BIOS to wait indefinitely. The default setting is 1.
Boot Mode Select
Use this item to select the type of device that the system is going to boot from. The
options are Legacy, UEFI, and Dual. The default setting is Dual.
Fixed Boot Order Priorities
This option prioritizes the order of bootable devices that the system to boot from.
Press <Enter> on each entry from top to bottom to select devices.
•
Dual Boot Order #1
•
Dual Boot Order #2
•
Dual Boot Order #3
•
Dual Boot Order #4
•
Dual Boot Order #5
•
Dual Boot Order #6
•
Dual Boot Order #7
Chapter 7: BIOS
7-39