Table of Contents
Advertisement
1. Unlock the stopper of the caster.
Pulling up the lever of the stopper for
caster releases the lock.
(Only the two casters in front of the unit
are attached the stopped.)
2. Move the device to the place to be
installed.
If there is a step on the floor, the too strong
impact is given to the caster, and could give
the damage.
In that case, move the
device by lifting at the step.
3. When the installation place is determined,
pull down the lever of the stopped for
caster, and lock them.
4. Drain Tap Check
•
Check whether the drain tap is detached
or not.
5. Power Plug Connection
•
Check the power of the earth leakage breaker is turned "OFF", and plug the power cord in the
receptacle.
Release lock
Lock
9
Installation Method
Stopper
Caster
Drain Tap
Drain Hose
Advertisement
Table of Contents
