In The Event Of Failure - Yamato CA300 Instruction Manual

Trouble Shooting
Condition
The device does not start when
turning on the power switch.
Not fallen the temperature.
In lighting on the lamp,
Error Sign
Turned on
the refrigerator Overload of refrigerator
trouble lamp
In the case if the error other than listed above occurred, turn off the power switch and primary
power source immediately.
Service Office.
•
Power plug is not connected to the receptacle correctly.
•
Power failure.
•
Earth leakage breaker is turned to "OFF"
•
The cooling fin is clogged.
•
The cooling liquid is overheated.
•
The ambient temperature is exceeding 30℃(CA800) or 35℃
(CA300).
•
The peripheral of the ventilating port is shut down.
Cause
•
Immediately turn off the power, remove the cause of
the error referring to the "Trouble Shooting" (Not
fallen the temperature) above, and turn on the power
again after passing the certain time.
•
In case of lighting the alarm lamp again, make a call
to the service office.
Contact the shop of your purchase or nearest Yamato Scientific
16

In the Event of Failure...

Possible Causes
Remedy