Dalsa Calibir GXM640 User Manual page 83

The information contained in this document is not subject to Export Control Regulation in Canada.
Display Name
Reset Error Log
User-Defined Buffer
BIST
BIST Status
Passed
FW Update Failure
Firmware Error
Sensor Board Error
Memory Test Failed
Network Loopback
Failure
Out of Range
Temperature
Power-up Configuration
Selector
Device Acquisition Type
Sensor
Device TL Type
GigE Vision
Device TL Version Major
Device TL Version Minor
DFNC Major Rev
DFNC Minor Rev
SFNC Major Rev
SFNC Minor Rev
SFNC SubMinor Rev
Calibir GXM640 IR Camera User's Manual
Feature & Values
crashLogReset
deviceUserBuffer
deviceBIST
deviceBISTStatus
FirmwareUpdateFailure
FirmwareError
SensorBoardError
MemoryTestFailed
NetworkLoopbackFailure
OutOfRangeTemperatureSpecification
UserSetDefaultSelector
deviceAcquisitionType
DeviceTLType
DeviceTLVersionMajor
DeviceTLVersionMinor
deviceDFNCVersionMajor
deviceDFNCVersionMinor
DeviceSFNCVersionMajor
DeviceSFNCVersionMinor
DeviceSFNCVersionSubMinor
Description
Resets the error log counter to 0.
Defines a 4K byte store register that
can hold user-specific data. Camera's
user settings must be saved to make
the buffer's
across reboots.
Triggers a manual Built-In Self Test
(BIST) of the device.
Displays the result of the device
Built-In Self Test (BIST).
Passed The device passed the BIST.
Firmware update failure.
Firmware error.
Sensor board error.
Memory test failed.
Network loopback failure.
Out of range temperature.
Selects the camera configuration set
to load and make active on camera
power-up or
configuration
camera non-volatile memory. For
more information, refer to the User
Set Control Category.
Displays the Device Acquisition Type
of the product.
Sensor The device gets its data directly from
a sensor.
Transport Layer type of the device.
GigEVision GigE Vision Transport Layer
Major version
Transport Layer.
Minor version
Transport Layer.
Major revision
Naming Convention which was used
to create the device's XML.
Minor revision
Naming Convention which was used
to create the device's XML.
Major Version
Standard
Convention which was used to create
the device's XML.
Minor Version
Standard
Convention which was used to create
the device's XML.
SubMinor Version of the Genicam
Standard
Convention which was used to create
the device's XML.
contents persistent
reset. The camera
sets are stored in
of the device's
of the device's
of Dalsa Feature
of Dalsa Feature
of the Genicam
Features Naming
of the Genicam
Features Naming
Features Naming
Operational Reference  83
View
Expert
DFNC
Expert
DFNC
Guru
DFNC
Guru
DFNC
Beginner
Invisible
DFNC
Invisible
Invisible
Invisible
Invisible
Invisible
Invisible