HP Compaq Presario,Presario 7481 Supplementary Manual page 69

Symptom
Display only fills part
of the screen.
Display is too faint.
Resolution cannot be
adjusted to desired
setting.
Display
Problem
If you are using a Flat-Panel
Monitor (available on select
models), your resolution
settings are not set properly.
Brightness and contrast
controls are not set properly.
Windows does not detect
display driver.
Troubleshooting Guide
Solution
 1. On the Taskbar, click the Start button
and point to Settings.
 2. Click Control Panel.
 3. Double-click Display.
 4. Click the Settings tab.
 5. In the Display area, click the
resolution slider for the Screen and
drag it to the right. Repeat this step
for the Desktop resolution slider.
Increase the resolutions to the
maximum allowable.
 6. Click OK to accept the new settings
then close the Control Panel window.
Adjust the brightness and contrast controls
on your monitor.
 1. On the Taskbar, click the Start button
and point to Settings.
 2. Click Control Panel.
 3. Double-click the System
 4. Click the Device Manager tab.
 5. Click the
next to Display Adapters
and select the installed display
adapter.
 6. Click the Remove button, and click
OK.
 7. Restart your Internet PC and let
Windows redetect the display driver.
6-9
icon.