Simplex 4100ES Installation Instructions Manual page 18

Card Properties Tab
The Card Properties tab is open by default when you open the EPS window. The fields on this tab are filled with the default settings provided by the
Programmer. These settings can be edited.
Data Entry Tab
Enter the date corresponding to the system.
• Battery Type. Select the FACU Battery type.
• Option Cards City Connect. Select this option when the City Connect card is to be populated on the EPS.
• Option Cards Relay Card. Select this option when the Relay card is to be populated on the EPS.
• Depleted Battery Cutout. Select this option if the EPS should shut itself off after detecting a depleted battery condition when no AC power is
present. This option is de-selected by default.
• External battery charger. Select this option if the EPS will not be used to charge the batteries.
AUX/NAC Tab
This tab allows the user to configure the operation mode of the AuxNAC circuit. The AuxNAC circuit will support basic coding pattern but will not
support the QuickAlert or Wheelock operation. User will be able to select the device type for this channel using a combo box. The list of point types
should be derived directly by the device type selected.
Point Editing Tab
The following options are used to edit points in the system.
• Device Type. Assign the device type to the appliance or device using the following criteria:
TrueAlert ES Appliances:
- A/O: Use this device type for TrueAlert ES Audible (A/O) devices.
V/O: Use this device type for TrueAlert ES Visual (V/O) devices.
-
- A/V: Use this device type for TrueAlert ES Audible/Visual (A/V)devices.
Devices
ISO: Use this device type for a TrueAlert isolator devices. The isolator device has a PID beginning with 4905 -xxxx.
-
- Repeater: Use this device type for the 4009 IDNAC Repeater.
DCAI: Use this device type for the 4100-6103 Dual Class A Isolator Card.
-
- Unused: Use this device type for unused devices.
True Alert Devices
- STRB :Use this device type for strobe-only TrueAlert devices. Strobe-only (STRB) devices use 4906-xxxx series PIDs.
- HORN: Use this device type for horn-only TrueAlert device. Horn-only devices use 4901 -xxxx series PIDs.
A/V. Use this device type for combination TrueAlert Audible/Visual (A/V) devices. All A/V devices use 4906-xxxx series PIDs.
-
- ASTRB: Use this device type for amber strobe-only TrueAlert Mass Notification devices. Amber strobe-only (ASTRB) devices use 4906-xxxx
series PIDs.
page 18
4100ES Extended Power Supply Installation Instructions
Figure 21: Adding the EPS to the FACU
579-1015 Rev U