4、Installation Steps - HOMCOM A90-146V01 Assembly Instruction Manual

4、Installation steps
4.1 foot tube installation
1）Take out the front foot tube and put it into the front arc of the frame and align the holes.
Then, insert the bolts into the holes. Insert the arc cushion Ф 8 and the spring washer Ф 8 on
the bolts in turn. Then put on the cover nuts and lock them with our special open-ended
wrench.
2）The installation method of rear foot tube is the same as above.
Note: (after the installation of the front and
rear pins, the product may have three feet
on the ground. At this time, the height of
the black leg cover on the pin can be
adjusted to balance the product.)
~ 7 ~