Canon BJC-3000 Series User Manual page 82

3
Windows
Open the Printer Properties dialog box, then select the most appropriate
icon in the Choose Print Mode box under the Main tab. Select Glossy Photo
Cards in the Media Type box. Also make sure that the BJ Cartridge setting
matches the BJ cartridge installed in the printer.
Change the settings if necessary.
Macintosh
Select the most appropriate icon that indicates the print mode in the Printer
Properties dialog box. Specify the media type (Glossy Photo Cards), and
the BJ cartridge installed in the printer.
4
Click the Page Layout tab and make sure that the Page Size setting is
Canon 4" x 6".
Normally you can set the paper size with the application program. However,
if the setting on the Page Layout tab does not match the setting in the
application program, or if your application program does not provide a size
selection for Glossy Photo Cards, specify the setting here.
5
Start the print job.
6
Remove each printed card as it is ejected from the printer.
Do not touch the printed side until the ink is completely dry. About two
minutes are required for drying.
Using Glossy Photo Cards
Printing on Paper and Other Media 82