Canon BJC-3000 Series User Manual page 342

C 3 A
HECK RE YOU PRINTING ON CURLED PLAIN PAPER
If curled plain paper is loaded with the curl bowing up, the print head may
scratch the bottom edge of the paper.
Try to uncurl the paper. If necessary, turn the paper over, and load it in the
sheet feeder again.
C 4 A
HECK RE YOU EXECUTING A HIGH
If you execute a high-density print job on plain paper, the paper may
absorb too much ink and curl, and the print head may scratch the surface
of the curled page. Lower the Intensity setting.
1
Open the Printer Properties dialog box, and click the Advanced button in
the Main tab.
2
Click the Color tab.
3
Use the Intensity slide bar to change the print density setting.
C 5 A
HECK RE YOU PRINTING OUTSIDE THE RECOMMENDED PRINTING AREA
If you print outside the recommended printing area, the print head may
scratch the bottom edge of the page.
To avoid problems, print only in the recommended printing area.
When you print on High Gloss Photo Film or Back Print Film, the bottom
Note
margin must be larger than 1.1 in. (26 mm).
Printing Area
?
-
DENSITY PRINT ON PLAIN PAPER
Printout Is Unsatisfactory
?
?
Troubleshooting 342