Canon BJC-3000 Series User Manual page 353

C 5 I
HECK S THE CORRECT PRINTER PORT SELECTED
If you are using the parallel interface to connect your printer, set your
printer port to LPT1.
If you are using USB Interface to connect your printer, set your printer port
to USBPRN.
1
Open the Printer Properties dialog box: click Start, select Setting, and
click Printing. Highlight the Canon BJC-3000 icon and right-click. Now
select Properties.
2
Click the Details tab and select LPT1 or USBPRN in the Print to the
following port box (LPT1: Canon BJ LPT Printer Port).
C 6 I
HECK S THE PRINTER PORT SET TO
You may not be able to print correctly if the printer port is set for ECP.
Cancel the ECP mode, and print again.
If the problem is not solved by cancelling the ECP mode, contact your
computer manufacturer.
Printer Does Not Start or Stops Mid-Job
?
Windows
ECP?
Windows
Troubleshooting 353