Canon BJC-3000 Series User Manual page 464

Scanning Images With Application Software
This section explains how to start IS Scan from a TWAIN image editing application software
so that you can scan images.
I Selecting a TWAIN-compatible Device
Before you scan images with application software, you must first select a TWAIN-
compatible device using the BJC-3000 driver. The basic procedure is described below
(steps may vary based on your application software).
1
Start the application software and then select New... from the File menu.
Then, open the menu you use to scan images. Install the scanner
cartridge in the printer.
2
To open the dialog box for selecting a TWAIN-compatible input device, you
normally select Import and then select TWAIN Select... from the File
menu. The "Select a source" dialog box is displayed.
3
Click the IS Scan BJC-3000 DS icon
and then click the OK button.
BJC-3000 is now selected as the input
device. Once you have performed these
steps, the setting remains in effect until
you change to another input device.
Using the Scanner With Macintosh 464