6
Using both hands, rotate the Roll Holder in the direction
of the arrow to rewind the roll.
7
Holding the Roll Holder fl ange (a), remove the holder
from the Roll Holder Slot .
•
See the following procedure for instructions on removing the Roll Holder from the roll.
(→"Removing Rolls From the Roll Holder," User's Guide)
8
Lower the Ejection Guide and close the Top Cover .
•
To load new paper in the printer at this point, see the following procedure.
(→
, Loading Rolls in the Printer)
•
Clean inside the top cover before loading paper.
(→
, If Paper is Soiled)
19
Removing the Roll from the Printer
a