Canon imagePROGRAF iPF8300S Basic Guide No.1 Basic Manual page 15

4
Holding the Roll Holder so that the side with the white
gear faces the side of the Roll Holder Slot with a white
gear, load the Roll Holder shaft (a) into the grooves (b)
on both ends of the Roll Holder Slot , fully into the slot.
• Be careful not to drop the roll and hurt yourself when loading it.
• Be careful not to pinch your fi ngers between the Roll Holder shaft (a) and the guide grooves (b) when
loading rolls.
5
Pull out the roll evenly on both ends and insert it in the
Paper Feed Slot (a). Advance the roll until it touches the
Paper Retainer (b).
Once the roll reaches the Paper Retainer , it is
automatically advanced over the Platen .
• Be careful not to soil the printing surface of roll paper as you insert it in the slot. This may affect the
printing quality.
• If the paper is wrinkled or warped, straighten it out before loading it.
• For paper that tends to curl, lift the Release Lever and manually pull the roll paper over the Platen .
• Load paper straight so it is not fed askew.
b
15
Loading Rolls in the Printer
a a b