Loading Rolls in the Printer
Load rolls in the printer as follows.
•
Always load rolls when the printer is on. If the printer is off when you load a roll, the paper may not be advanced
correctly when you turn the printer on.
•
Before loading rolls, make sure the printer is clean inside the Top Cover and around the Ejection Guide . If these
areas are dirty, we recommend cleaning them in advance. (→
1
Press the Load button.
2
Press ▲ or ▼ to select Load Roll Paper , and then press
the OK button.
•
If any paper has been advanced that will not be used, a message is shown requesting you to remove it.
Press ▲ or ▼ to select Yes , and then press the OK button. Remove the paper and go to the next step.
3
Open the Top Cover and lift the Ejection Guide .
, If Paper is Soiled)
14