Philips AVENT SCD831 Manual page 27

HOW TO USE / CONNECTING THE UNITS
What is the difference
between the various user
modes on the parent
unit: Video, Audio, VOX
and ECO?
How can I reset the
parent unit?
See below list for an explanation on the available modes on your baby
monitor�
* Video mode: the screen and sound of the parent unit are always on.
* Audio mode: only audio will be activated. The display of the parent
unit switches off when AUDIO mode is activated. The link light shows
that the parent unit is still on and connected to the baby unit� All normal
correspondence with the baby unit is possible via the talk back, lullaby
and sensitivity buttons�
* VOX mode: The display and sound of the parent unit switch off if there
is no sound detected for 20 seconds (or not enough sound above the
sensitivity setting)� Both display and sound will be activated immediately
when your baby cries and the sensitivity threshold is passed� When the
sound drops below the sound threshold, the video will remain active for
20 seconds. When one of the control buttons is pressed (brightness or
volume), the device shall display video for roughly 5 seconds. Also the
lullaby menu is accessible�
* ECO mode: The display and sound of the parent unit switch off
when no sound is detected for 20 seconds� Eco Mode reduces power
consumption during quiet times while keeping you connected to your
baby� In ECO mode the ECO LED light is green and the device will operate
on a different connection modus. In ECO mode the parent unit uses the
2 seconds ping mechanism to check the connection with the baby unit
instead of a continuous radio frequency connection� Therefore the Baby
Unit will also consume less energy in ECO mode�
You can reset the parent unit by simultaneously press the "power on/
off button" and the round "navigation down button" at the front of the
parent unit for about 1 second. The parent unit will switch off. In order
to turn the parent unit back on, press the "power on/off button". Specific
user information stored in the memory of the parent unit such as user
mode, brightness settings, volume, lullaby selection, zoom selection and
vibration settings will not be lost�
- English 25 -