Table of Contents
Advertisement
OPERATING FAULTS
FAULTS
The card does not lock or unlock
the doors.
The message "Place the card
near the START button" appears
on the instrument panel.
5.26
(2/6)
POSSIBLE CAUSES
Card battery is flat.
Use of appliances operating on the
same frequency as the remote con-
trol (mobile phone, etc.).
Vehicle located in a high electro-
magnetic radiation zone.
Secondary 12 volt battery dis-
charged.
Desynchronisation of the card.
The card battery is flat or the card is
out of synch.
WHAT TO DO
Replace the battery or have it replaced. You will
still be able to lock, unlock, and start your vehicle
➥ 1.33 and ➥ 2.2.
Stop using the devices or use the key provided
➥ 1.33.
Use the key that is built into the card ➥ 1.33.
Unlock the driver's door by inserting the key in-
tegrated in the card into the door lock ➥ 1.33 then
place the card in the placement area ➥ 2.2 and
press the "START" button to synchronise the
card.
Check the card battery status or place the card in
the placement area ➥ 2.2 provided for this pur-
pose.
Advertisement
Chapters
Table of Contents
