Table of Contents
Advertisement
CRUISE CONTROL
5
4
Putting the function on
standby
The function is set to standby if you:
– 5 switch (0);
– the brake pedal;
– move to the neutral position.
The cruising speed is stored and dis-
played in grey on the instrument panel.
(4/5)
6
Returning to the cruising speed
If a speed is stored, it can be recalled,
once you are sure that the road condi-
tions are suitable (traffic, road surface,
weather conditions, etc.). Push the 4
control upwards on (RES/+) if the ve-
hicle speed is above 19 mph (30 km/h).
When you see a reminder of the stored
speed, cruise control activation is con-
firmed by the display in green of the
cruising speed and, depending on the
vehicle, the 6 warning light coming on.
NB: if the speed previously stored is
much higher than the current speed,
the vehicle will accelerate more rapidly
to reach this threshold.
When the cruise control is set to
standby, push the 4 control downwards
on (SET/-) to reactivate the cruise con-
trol function without taking into ac-
count the stored speed – it is the speed
at which the vehicle is moving that is
taken into account.
2.81
Advertisement
Chapters
Table of Contents
