Renault MEGANE E-TECH 100% ELECTRIC 2022 User Manual page 253

ACTIVE DRIVER ASSIST
16
Activating the "Lane
centering assist." function
The "Lane centering assist." function
must be previously selected via the
multimedia screen to be activated.
From the "Vehicle" World, select to the
"Driving assistance" tab then the "Lane
keeping system" menu.
Select "Lane centering assist.".
This selection remains stored when the
vehicle is stopped.
(7/15)
The "Lane keeping system" must
be activated. If the warning light of
the 16 button is not lit, press the

button 16 .
The message "Lane keeping system
activated" appears on the instrument
panel to confirm that the function is ac-
tivated.
This status remains stored when the
vehicle is stopped.
The adaptive cruise control Stop and
Go must be switched on.
To do this, press the 14 button to ac-
tivate it. The message "Active driver
assist ready: SET to activate" (or, de-
pending on the vehicle, "Road assist
ready: SET to activate") will appear on
the instrument panel.
The warning light 22
in grey on the instrument panel.
Now push the steering wheel control 10
downwards (SET/-).
The "Active Driver Assist" consisting of
the adaptive cruise control Stop and Go
and the "Lane centering assist." func-
tion is then activated.
22
The warning light 22
in green and the left-hand and right-
hand line indicators 21 are displayed on

the instrument panel to confirm that the
is displayed function is activated and directing your
vehicle to the centre of the lane.
You can interrupt the "Lane centering
assist." function at any time by moving
the steering wheel. As soon as you stop
turning the steering wheel, the "Lane
centering assist." function is reacti-
vated.
Note: you must keep your hands on the
steering wheel when using the "Lane
centering assist." function.
21
21

is displayed
2.111