The patented drive system makes sure that this machine is very easy to handle. The machine is simple to dismantle for ease of transportation. Application The BMG-435 can be used on almost any floor to plane, to make ready for coatings, or to remove coatings or glue residues. Steer...
Operating manual BMG-435 5/11 3. Safety Before operating the machine, the personnel who are going to use it must be familiar with the safety instructions given in this manual. Keep this manual near to the machine, so that it may be consulted.
Make sure the dust seal is in good condition, this to reduce the dust. Pull out the main plug when changing the diamond wings The BMG-435 weights 115 kilogram. Use appropriate appliances as a lift or crane. Lift the machine with a rope on the frame (2) Or detach the machine into parts and lift these parts.
Operating manual BMG-435 7/11 4. Initial operations Before using the machine it is important to inspect the machine. It is not permitted to use the machine if the machine safety is not according the checkpoints below. Checkpoints of electrical safety Use only extension cables for extending the main cable that are sized and marked in accordance with the overall power consumption of the machine.
Operating manual BMG-435 8/11 5. Operating During operating the BMG-435, the following additional safety instructions must be followed closely. Switch on the machine Turn on the dust collector before switching on the machine and connect the dust hose to the machine.
Store the cleaned and dry machine in a dry and humid free room. Protect the electrical motor from moisture, heat, dust and shocks. All repair work must to be done by qualified Blastrac personnel, this to guarantee a safe and reliable machine.
Contact Blastrac BV unit We will assist you We will assist you We will assist you with a good advice with a good advice with a good advice Design and specifications are subject to change without notice by Blastrac BV info@blastrac.eu...
Need help?
Do you have a question about the BMG-435 and is the answer not in the manual?
Questions and answers