Viewing Drive Properties - HP MR Gen10 Plus User Manual

Viewing drive properties

Viewing drive properties
Procedure Procedure
1. From the System Utilities screen, select System Configuration > HPE MRXXX Gen10+ > Main Menu > Drive Management.
2. In the Drive Management screen, select the drive.
3. In the drive screen, view the basic properties:
Property Property
Drive ID
Status
Size
Type
Model
Hardware Vendor
Associated Logical Drive List of logical drives associated with the drive
4. To view advanced properties, click Advanced....
Property Property Description Description
Certified Whether the selected drive is vendor-certified.
Logical Sector Logical sector size of this drive. Possible options are 4 KB or 512 KB.
Size
Physical Sector Physical sector size of this drive. Possible options are 4 KB or 512 KB.
Size
SMART Status Self-Monitoring Analysis and Reporting Technology (SMART) status of a drive. This feature monitors the
internal performance of all motors, heads, and drive electronics to detect predictable drive failures.
Revision Firmware revision of the drive.
Media Errors Physical errors that are detected on the disk media.
SAS Address World Wide Name (WWN) for a drive.
Drive Power Indicates the power condition (On or Power Save) of the drive.
State
Cache Setting Disk cache setting of the drive.
Available Size Available size of the drive.
Used Space Configured space of the drive.
Disk Protocol Type of hard disk drive used.
Device Speed Speed of the physical disk.
Negotiated Drive Negotiated link speed for the data transfer to/from the drive.
Transfer Speed
Number of Number of connections of the drive.
Connections
FDE Capable Whether the drive is encryption capable.
Data Integrity Whether the drive is capable of protection.
Capable
Temperature (C) Temperature of the drive.
Description Description
ID of the drive
Current drive status
Size of the drive in MB/GB/TB
Device type
Model number of the drive
Hardware manufacturer
Viewing drive properties 144