Selecting A Boot Mode - HP MR Gen10 Plus User Manual

Selecting a boot mode

Selecting a boot mode
Procedure Procedure
1. From the System Utilities screen, select System Configuration
2. Select a setting and press the Enter
UEFI Mode (default) - Configures the system to boot to a UEFI-compatible operating system.
NOTE: NOTE:
When booting to the UEFI Mode, configure the system to use native UEFI graphic drivers.
Legacy BIOS Mode - Configures the system to boot to a traditional operating system in Legacy BIOS compatibility mode.
3. Press the F10 F10 key to save your selection.
4. Reboot the server.
System Configuration > Boot Options
Enter key.
Boot Options > Boot Mode Boot Mode, and press the Enter Enter key.
Selecting a boot mode 93