Internal Mass Storage Configurations; Hard Disk Drive Configurations; Hard Disk Drive Configuration Jumper Locations - HP 9000 300 Series Service Handbook

Internal Mass Storage Configurations
Hard Disk Drive Configurations
Caution
Although the device is well-protected from physical shock
when installed in the computer, it is very easily damaged when
separate. Avoid dropping or striking the device. Handle it
gently at all times.
Figure 3-3 shows you the configuration jumper locations. Jumpers and their
settings are explained in Table 3-7.
Note the jumpers in the back of the drive are installed as follows:
• Jumpers installed on pins "in."
• Jumpers removed from pins = "out."
Figure 3-3. Hard Disk Drive Configuration Jumper Locations
Configurations 3-17