Enabling Drive Security - HP MR Gen10 Plus User Manual

Enabling Drive Security

Enabling Drive Security
Procedure Procedure
1. From the System Utilities screen, select System Configuration > HPE MRXXX Gen10+ > Main Menu > Controller Management.
2. In the Controller Management screen, select Advanced Controller Management.
3. In the Advanced Controller Management screen, select Enable Drive Security .
4. For the Key Management Mode, select either Local Key Management (LKM) or External Key Management (EKM) .
5. Optional. If you have selected Local Key Management (LKM), do the following:
a. Enter the required data on the screen. You are allowed to set the Security Key Identifier , Security Key, and Password at Boot
Time.
b. Select the I Recorded the Security Settings for Future Reference check box.
c. Click Enable Drive Security .
6. Optional. If you have selected External Key Management (EKM) , do the following:
a. Make sure that the iLO key manager is properly configured only then you can select External Key Management (EKM) . For more
information, see "Using Enterprise Secure Key Manager with iLO" in the HPE iLO 5 User Guide
b. Click Enable Drive Security .
c. Reboot the system.
The controller retrieves the SED drive keys from the remote HPE Enterprise Secure Key Manager server only during power-up. It
communicates to iLO through the BIOS.
HPE iLO 5 User Guide.
Enabling Drive Security 123