Xpdl.1 / Xpdl.2; Bpm - Musicom Lab MTX-5 Owner's Manual

SysEx (System Exclusive)
Message : Selects one of 80 System Exclusive slots.
Refer to the 4 4 .5.1 MIDI -> SysEx on the page 22 of the manual to edit the System Exclusive slots.
Delay
Time : Select the amount of time to pause up to 99ms before sending the next MIDI message.
Some MIDI devices do not recognize continuous input MIDI messages. In this case, you can use a time
delay to resolve the problem.

4.1.2 XPDL.1 / XPDL.2

This menu allows assigning the XPDL1 and XPDL2 to the current preset. Refer to 4 4 .5.1 MIDI -> XPDL on the page
21 of the manual for choosing whether to use an expression pedal or two foot switches.
Select
Global : The XPDL works with global settings when the current preset is recalled.
Preset : The XPDL works with current settings in this menu when the current preset is recalled.
Device
- Select the device to receive the control change message by XPDL.
CC# (CC Number)
- Selects the controller number to be sent.
Max.Value
- Highest controller value that the XPDL can send when its pedal is moved.
Min.Value
- Lowest controller value that the XPDL can send when its pedal is moved.
Beg.Value (Begin Value)
- Initial controller value that the XPDL sends when the current preset is recalled.

4.1.3 BPM

This menu allows assigning the BPM and two volume values. The BPM can be set to use the global BPM or preset
specific BPM.
BPM
Global : The BPM works with global BPM when the current preset is recalled.
40 - 209 : The BPM works with current value in this menu when the current preset is recalled.
MTX-5 MIDI Controller Owner's Manual 11