Bpm/Xpdl; Loop Order - Musicom Lab EFX-10D Owner's Manual

SysEx (System Exclusive)
Message : Selects one of 64 System Exclusive slots.
• Refer to the 4.6.3 SysEx on the page 26 of the manual to edit the System Exclusive slots.
Delay
Time : Select the amount of time to pause up to 99ms before sending the next MIDI message.
Some MIDI devices do not recognize continuous input MIDI messages. In this case, you can use a time
delay to resolve the problem.

4.1.2 BPM/XPDL

This menu allows assigning the BPM and XPDL to the current preset. The BPM can be set to use the global BPM or
preset specific BPM. XPDL can be selects one of 64 XPDL slots.
Refer to 4.5.1 MIDI > XPDL.Src on the page 22 and 4.6.2 XPDL on the page 25 of the manual for choosing whether
to use an expression pedal or two foot switches.
BPM
Global : The BPM works with global BPM when the current preset is recalled.
40 - 209 : The BPM works with current value in this menu when the current preset is recalled.
Same : The BPM works with previous preset BPM.
None : The BPM is not working.
XPDL
- Selects one of 64 XPDL slots.

4.1.3 Loop Order

This menu allows changing loop order and signal routing you can make the following settings.
• Change the connection order of effect loops
• Create a split connection
• Specify Carry Over
Symbol
EFX-10D Audio Controller Owner's Manual
Description
Input
Two Outputs
(Left/Right)
Symbol Description
Loop 1 ~ Loop 10
Carry-Over Loop
12