Table of Contents
Advertisement
4.6.7 TEMPO SYNC WITH
This sub-menu allows determining where to send the TAP-TEMPO signal.
1 & 2
Press to move cursor.
3 & 4
When the cursor is at the Line 1 - o
When the cursor is at the Line 2
5/TAP & BANK
When the cursor is at the Line 1 - o
STORE (MODE)
Storing any changes made while in this menu.
EXIT (MUTE/ )
exiting to the Utility menu.
4.6.8 TEMPO SYNC TIME
This sub-menu allows determining how long the TAP-TEMPO signal outputs.
1 & 2
Press to move cursor.
3 & 4
When the cursor is at the Line 1 - o
When the cursor is at the Line 2
5/TAP & BANK
When the cursor is at the Line 1 - o
STORE (MODE)
Storing any changes made while in this menu.
EXIT (MUTE/ )
exiting to the Utility menu.
4.6.9 XPDL RATE
The XPDL Rate parameter provides a selectable rate at which the EFX-LE will sample the pedal position
and send out MIDI Control Change messages. The XPDL Rate parameter is adjustable from 1 to 50ms. The
lower the value selected, the faster the transmission. However, the rate may need to be slowed down for
devices where an error may occur from receiving MIDI messages faster than a rate that the device can
process.
1 & 2
Press to move cursor.
3 & 4
When the cursor is at the Line 1 - i
When the cursor is at the Line 2
5/TAP & BANK
When the cursor is at the Line 1 - i
When the cursor is at the Line 2
STORE (MODE)
Storing any changes made while in this menu.
EXIT (MUTE/ )
exiting to the Utility menu.
EFX - LE Audio Controller Owner's Manual
Line 2 - h to p indicate the TEMPO SYNC WITH value.
MTC
: MIDI TIME CLOCK
: Moving a Utility menu.
p
: Scrolling a TEMPO SYNC WITH value.
: Moving a Utility menu by 5.
Line 2 - h to p indicate the TEMPO SYNC WITH value.
(
OFF
,
1 BAR
,
2 BARS
The TAP signal is output to the menu selected in TAP SYNC
WITH during the time selected in TAP SYNC TIME.
: Moving a Utility menu.
p
: Scrolling a
: Moving a Utility menu by 5.
Line 2 - h to p indicate the XPDL RATE value (1-50 ms).
: Moving a Utility menu.
p
: Decreasing/increasing a value.
: Moving a Utility menu by 5.
p
: Decreasing/increasing a value by 5.
F1
: FUNCTION SWITCH 1
or
CONTINUE
)
value.
TEMPO SYNC TIME
28
Advertisement
Table of Contents
