Firmware Update - Musicom Lab MTX-5 Owner's Manual

5. FIRMWARE UPDATE

When new features are added or bugs are fixed, new firmware will be released periodically.
Follow the procedure below to update the new firmware.
Download the new firmware and M M TX-5 Editor software from the link below. Install M M TX-5 Editor file and run
it.
http://musicomlab.com/mtx-5.htm
To enter firmware update mode, Connect a USB cable to your MTX-5 and PC/Mac while holding P1, P2 and
P3 switches down. The MTX-5 is powered via a USB cable.
Wait until ' Connected SN:xxxxxxx Update Mode' is displayed on the progress bar at the top of the MTX-5
editor.
Click the ' FILE/TRANSFER' tab at the top of the editor screen.
Click the ' OPEN' button in the 'F F IRMWARE UPDATE' area to load the new firmware file.
Press the ' UPDATE' button to start updating.
Be careful not to let your PC/Mac go to SLEEP.
It takes about 4~7 minutes.
MTX-5 MIDI Controller Owner's Manual 26