Midi Out2/3 Trs Configuration - Musicom Lab MTX-5 Owner's Manual

7. MIDI OUT2/3 TRS CONFIGURATION

Different manufacturers use different methods to send and receive midi signals using TRS connectors.
By changing the position of the DIP switch, you can choose the appropriate method for each pedal.
TRS MIDI STANDARD (Default)
TIP ACTIVE
RING ACTIVE
Do not configure the DIP switch in any other way than the three illustrated above.
It can damage internal parts.
MTX-5 MIDI Controller Owner's Manual
DIP switch numbers 1 to 3 control M M IDI OUT3.
DIP switch numbers 4 to 6 control M M IDI OUT2.
The DIP switch reference part number on the PCB is DSW2.
MIDI is sent via the TIP and power via the RING.
1 / 4 : O O N position
2 / 5 : O O N position
3 / 6 : O O FF position
MIDI is sent via the TIP and Ring is floating.
1 / 4 : O O FF position
2 / 5 : O O N position
3 / 6 : O O FF position
MIDI is sent via the RING and TIP is floating.
1 / 4 : O O FF position
2 / 5 : O O FF position
3 / 6 : O O N position
28