Epson WorkForce Pro WF-4830 Series User Manual page 363

Administrator Information
1. Access Web Config, and then select the Device Management tab > Export and Import Setting Value >
Export.
2. Select the settings that you want to export.
Select the settings you want to export. If you select the parent category, subcategories are also selected.
However, subcategories that cause errors by duplicating within the same network (such as IP addresses and so
on) cannot be selected.
3. Enter a password to encrypt the exported file.
You need the password to import the file. Leave this blank if you do not want to encrypt the file.
4. Click Export.
Important:
c
If you want to export the printer's network settings such as the device name and IPv6 address, select Enable to
select the individual settings of device and select more items. Only use the selected values for the replacement
printer.
Related Information
"Application for Configuring Printer Operations (Web Config)" on page 271
&
Import the settings
Import the exported Web Config file to the printer.
Important:
c
When importing values that include individual information such as a printer name or IP address, make sure the
same IP address does not exist on the same network.
1. Access Web Config, and then select the Device Management tab > Export and Import Setting Value >
Import.
2. Select the exported file, and then enter the encrypted password.
3. Click Next.
4. Select the settings that you want to import, and then click Next.
5. Click OK.
The settings are applied to the printer.
Related Information
"Application for Configuring Printer Operations (Web Config)" on page 271
&
> >
Managing the Printer
363
Backing Up the Settings