Table of Contents
Advertisement
Product Information
DRD:
If you have subscribed to a distinctive ring service from your telephone company, select the ring
pattern to be used for incoming faxes. The distinctive ring service, offered by many telephone
companies (the service name differs by company), allows you to have several phone numbers on one
phone line. Each number is assigned different ring pattern. You can use one number for voice calls
and another for fax calls. Depending on the region, this option may be On or Off.
Rings to Answer:
Select the number of rings that must occur before the printer automatically receives a fax.
Remote Receive:
Remote Receive
When you answer an incoming fax call on a phone connected to the printer, you can start
receiving the fax by entering the code using the phone.
Start Code
Set the start code of Remote Receive. Enter two characters using 0-9, *, #.
Rejection Fax:
Rejection Fax
Select options to reject receiving junk faxes.
❏ Rejection Number List: If the other party's phone number is in the rejection number list, set
whether to reject the incoming faxes.
❏ Fax Header Blank: If the other party's phone number is blocked, set whether to reject
receiving the faxes.
❏ Unregistered Contacts: If the other party's phone number is not in the contacts, set whether
to reject receiving the faxes.
Edit Blocked Number list
You can register up to 30 fax numbers to reject the faxes and calls. Enter up to 20 characters
using 0-9, *, #, or space.
Related Information
"Making the Printer Ready to Send and Receive Faxes" on page 350
&
"Making Settings for a PBX Phone System" on page 352
&
"Receiving Incoming Faxes" on page 112
&
"Making Settings for Blocking Junk Faxes" on page 355
&
Send Settings
You can find the menu on the printer's control panel below.
Settings > General Settings > Fax Settings > Send Settings
>
>
Settings Menu List
General Settings
282
Advertisement
Table of Contents
