Epson WorkForce Pro WF-4830 Series User Manual page 149

Solving Problems
Paper handling is inappropriate.
Solutions
Follow paper handling precautions.
"Paper Handling Precautions" on page 27
&
The paper is moist or damp.
Solutions
Load new paper.
Static electricity is causing sheets of paper to stick to each other.
Solutions
Fan the paper before loading. If the paper still does not feed, load one sheet of paper at a time.
Too many sheets are loaded in the printer.
Solutions
Do not load more than the maximum number of sheets specified for the paper.
"Available Paper and Capacities" on page 259
&
The paper settings on the printer are incorrect.
Solutions
Make sure the paper size and paper type settings match the actual paper size and paper type loaded in the
printer.
"Paper Size and Type Settings" on page 28
&
Multiple sheets of paper feed at the same time during manual 2-sided printing.
Solutions
Remove any paper that is loaded in the paper source before you reload the paper.
Original Does Not Feed in the ADF
The following causes can be considered.
Originals that are not supported by the ADF are being used.
Solutions
Use originals supported by the ADF.
"ADF Specifications" on page 292
&
The originals are loaded incorrectly.
Solutions
Load originals in the correct direction, and slide the ADF edge guides against the edges of the originals.
>
The Printer Does Not Work as Expected
>
Paper Does Not Feed Properly
149