Installing The Scsi Card - Canon CanoScan FB 1200S Getting Started

Installing the SCSI Card

These procedures are only required for use of the scanner with the Windows
platform.
What is a SCSI Card?
SCSI (pronounced 'scuzzy') is a standard interface for connecting SCSI
devices, such as scanners and hard disk drives. SCSI connectors are
usually not supplied as standard equipment on computers running
Windows. Accordingly, a SCSI card with a SCSI connector must be
installed to connect SCSI devices together.
SCSI Card
WARNING
• Before you pick up the SCSI card, discharge the static electric-
ity from your body by touching a grounded metal surface like
the chassis of the computer.
• Do not remove the SCSI card from its protective wrapping
until you are ready to install it.
• Hold the SCSI card by the edges. Never touch the terminals or
other circuitry with your bare hands.
• Using the computer with the SCSI card installed incorrectly
can damage the SCSI card. Make sure the SCSI card is installed
correctly before use.
• If you experience difficulty with installation or in using the
SCSI card, call a Canon Customer Support Help Desk.
• The SCSI card shipped with this product is not guaranteed to
support daisy chain device configurations. It is recommended
that this SCSI card be used only to connect the scanner to your
computer.
• Windows models can be used with Windows 95, Windows 98
and Windows NT 4.0.
SCSI Connector
FB1200S Getting Started
Windows
Macintosh
7