Canon CanoScan FB 1200S Getting Started page 13

WARNING
• If the scanner is already connected to the SCSI card, the New
Hardware Found dialog (old Windows 95 version) or Device Driver
Wizard dialog (new Windows 95 version) will display. In this case,
refer to Step 3 in Installing the Scanner Software (p. 22).
Confirming the Status of the SCSI Card
The following procedures show how to confirm that the SCSI card is
operating correctly.
• Windows 95/98
1 Click the Windows [Start] button on the taskbar
and select [Settings] and [Control Panel].
The Control Panel window will display.
2 Double-click the [System] icon.
The System Properties window will display.
FB1200S Getting Started
Windows
Macintosh
11