Removing The Packing Material; Installing The Software - Canon imageFORMULA DR-M140 Service Manual

CHAPTER 4 INSTALLATION & MAINTENANCE
3. Removing
Material
Remove all of the tape and protective
material that is attached to the main body.
Figure 4-101
Figure 4-102
Figure 4-103
4-2
the Packing
COPYRIGHT © CANON ELECTRONICS INC. 2011

4. Installing the Software

Install the software from the included
setup disk that is required in order to use the
scanner.
Note: The software
before connecting the machine to a
computer.
The following shows an outline of the
installation.
1) Login using
Administrator privileges.
2) Before installing the software, exit all
other applications.
3) Load the setup disk into the DVD drive of
the computer.
4) The setup menu starts automatically.
5) Click [Typical Installation].
Figure 4-104
Finish the installation by following the
on-screen messages.
should be installed
an account with
CANON DR-M140 FIRST EDITION