Canon CanoScan FB 1200S Getting Started page 50

How to Use ScanGear CS-S
• Starting ScanGear CS-S
Select [TWAIN_32] as a TWAIN driver from a program (p. 29).
• How to View the Electronic Manual
Place the CD-ROM in the CD-ROM drive, click [View the Electronic
Manuals] and select [ScanGear CS-S].
The procedures to read the electronic manuals are explained in the
section entitled Viewing Electronic Manuals with Adobe Acrobat
Reader 3.0 (p. 57).
What is a TWAIN Driver?
• TWAIN is the acronym for a set of worldwide standards for software that
processes data exchanged between graphics programs and input devices,
such as scanners. A device driver based on these standards is called a
TWAIN driver.
• ScanGear CS-S is not a stand-alone program that can be started by itself.
It is used as a TWAIN driver. In this case, start another program first,
then select [TWAIN_32] from within the program. The images scanned
at this time will be directly loaded into that program (the program must
comply with the TWAIN_32 standard).
Start the TWAIN driver from the
program
• The method for starting TWAIN drivers varies between programs.
48
FB1200S Getting Started
The TWAIN driver operates in the
program's window
Windows
Macintosh