Table of Contents
Advertisement
10 - MENU STRUCTURE
The following chart describes the MENU tree of the product, the terms shown in BOLD indicates the
default settings.
MENU
1
CONNECT
ADDRESS
DMX MODE
WIRELESS
ETHERNET
SETTING
001-512
DMX / WDMX
001-512
sACN
001-512
ARTNET
STANDARD
WDMX ON/OFF
ON/OFF
WDMX MODE
TRANSMITTER/
RECEIVER
TX LINK
ON/OFF
TX UNLINK
ON/OFF
RX RESET
ON/OFF
IN TO WDMX (TX)
ON/OFF
ON/OFF
WDMX TO DMX
(RX)
ARTNET SETTINGS
IP ADDRESS
NET
SUBNET
UNIVERSE
sACN SETTINGS
IP ADDRESS
UNIVERSE
MERGE MODE
ON
ETHERNET TO
DMX
OFF
PROLIGHTS - Astra Hybrid420
Set DMX chart for Main Fixture.
Enable/Disable the wireless card.
Allows to choose whether to set
the wireless on the Transmitter or
Receiver.
WDMX mode is unlocked only if
WDMX ON / OFF is ON.
TX link unlock when the unit is set
as a transmitter..
Disconnect the transmitter from all
receivers.
TX unlink unlocks only if WDMX
mode is on transmitter.
Total reset of the receiver.
RX reset unlocks only if WDMX
mode is receiver.
Enable/Disable the transmission
of the DMX values via wdmx.
Enable/Disable the retransmission
of the DMX from the receiver
to the other units connected by
cable to the receiver itself.
Set IP address of the fixture.
Set Net for ArtNet protocol.
Set Subnet for ArtNet protocol.
Set Universe for ArtNet protocol.
Set IP address of the fixture.
Set Universe for sACN protocol.
OFF/HTP/
Set
Merge
Mode
LTP
protocol.
Enable
/
retrasmission from sACN/ArtNet
signal to DMX out port.
for
sACN
Disable
DMX
15
Advertisement
Table of Contents
