EVO190E PROFILER WITH LED SOURCE Manuale Utente User Manual...
Page 2
Music & Lights S.r.l. si riserva ogni diritto di elaborazione in qualsiasi forma delle presenti istruzioni per l’uso. La riproduzione - anche parziale - per propri scopi commerciali è vietata. Al fine di migliorare la qualità dei prodotti, la Music&Lights S.r.l. si riserva la facoltà di modificare, in qualunque momento e senza preavviso, le specifiche menzionate nel presente manuale di istruzioni.
4. 1 Manutenzione e pulizia del sistema ottico 4. 2 Sostituzione fusibile 4. 3 Risoluzione dei problemi 5 Appendice 5. 1 Vista esplosa Certificato di garanzia • EVO190E Contenuto dell'imballo: • Staffa di fissaggio • Cavo di alimentazione • Manuale utente...
EVO 190E ATTENZIONE! Prima di effettuare qualsiasi operazione con l’unità, leggere con attenzione questo manuale e conservarlo accuratamente per riferimenti futuri. Contiene informazioni importanti riguardo l’installazione, l’uso e la manutenzione dell’unità. SICUREZZA Avvertenze generali • I prodotti a cui questo manuale si riferisce sono conformi alle Direttive della Comunità Europea e per- tanto recano la sigla .
EVO 190E INFORMAZIONI GENERALI Spedizioni e reclami Le merci sono vendute “franco nostra sede” e viaggiano sempre a rischio e pericolo del distributore/clien- te. Eventuali avarie e danni dovranno essere contestati al vettore. Ogni reclamo per imballi manomessi dovrà essere inoltrato entro 8 giorni dal ricevimento della merce. Garanzie e resi Il prodotto è...
- 1 - INTRODUZIONE 1.1 DESCRIZIONE EVO190E è il primo profiler con sorgente di luce LED in grado di rimpiazzare i tradizionali sagomatori con lampada HPL 750W. Disponibile nelle versioni Tungsten (3100K) e Daylight (5600K), EVO190E è il primo pro- iettore nella sua categoria in grado di offrire un considerevole output di luce ed eccezionali proprietà...
EVO 190E 1.3 ELEMENTI DI COMANDO E DI COLLEGAMENTO MENU ENTER DOWN Vista Posteriore Fig.1 1. STAFFA DI MONTAGGIO 8. POWER IN (connettore di potenza Neutrik) 2. MANOPOLA DI FISSAGGIO per la staffa di per il collegamento ad una presa di rete montaggio (100-240V~/50-60Hz) tramite il cavo rete in 3.
- 2 - INSTALLAZIONE 2.1 MONTAGGIO Il proiettore EVO190E può essere collocato su un piano solido. Inoltre, grazie alle possibilità di fissaggio sulla staffa (fig.2), l’unità può essere montata anche a testa in giù, su una traversa. Per il fissaggio occorrono dei supporti robusti per il montaggio.
- 3 - FUNZIONI E IMPOSTAZIONI 3.1 FUNZIONAMENTO Per accendere il proiettore EVO190E, inserire la spina del cavo di alimentazione in una presa di rete (240V~ 50Hz). L’unità può essere comandata da un unità DMX di comando luce oppure svolgere autonomamente il suo programma.
EVO 190E 3.3 STRUTTURA MENU MAIN FUNCTION SELECTION SUB-SELECTION SUB-SELECTION DESCRIPTION Dimmer d.000 - d.100 Manual control the intensity of the fixture DMX/Slave To select the operating mode of the fixture SLAV DMX Address ADDR d001 - d512 DMX starting address selection Set the Key lock (password mode) Dimming curve off Dim1...
EVO 190E 3.4 MODALITÀ DIMMER Questa modalità permette di regolare manualmente l’intensità del proiettore: • Premere il tasto MENU fino a quando sul display non appare [DIM], quindi premere ENTER per confer- mare. • Utilizzare i tasti UP/DOWN per selezionare il valore di intensità desiderato [d.000 - d.100]. • Premere il tasto ENTER per salvare l’impostazione.
• Premere i tasti UP/DOWN e selezionare la modalità [SLAV]. • Servirsi dei connettori DMX del EVO190E e di un cavo XLR per formare una catena di unità. In certe condizioni e lunghezze si consiglia di effettuare una terminazione come mostrato a pagina 14.
EVO 190E 3.8 CONFIGURAZIONE CANALI DMX Il proiettore EVO190E dispone di diverse configurazioni dei canali DMX a cui si può accedere dal pannello di controllo. • Premere il tasto MENU fino a quando sul display non appare [SET], quindi premere il tasto ENTER.
EVO 190E 3.10 COLLEGAMENTI DELLA LINEA DMX La connessione DMX è realizzata con connettori standard XLR. Utilizzare cavi schermati, 2 poli ritorti, con impedenza 120Ω e bassa capacità. Per il collegamento fare riferimento allo schema di connessione riportato di seguito: DMX - INPUT DMX - OUTPUT Spina XLR...
EVO 190E 3.12 TABELLA CANALI DMX CH Function in UNO mode Value DIMMER 0% - 100% 000 - 255 CH Function in DOS mode Value DIMMER 0% - 100% 000 - 255 FINE DIMMER 0% - 100% 000 - 255 STD.P CH Function in STD.P mode Value...
EVO 190E - 4 - MANUTENZIONE 4.1 MANUTENZIONE E PULIZIA DEL SISTEMA OTTICO • Durante gli interventi, assicurarsi che l’area sotto il luogo di installazione sia libera da personale non qualificato. • Spegnere l’unità, scollegare il cavo di alimentazione ed aspettare finché l’unità non si sia raffreddata. • Tutte le viti utilizzate per l’installazione dell’unità...
EVO 190E 4.3 RISOLUZIONE DEI PROBLEMI Anomalie Possibili cause Controlli e rimedi Mancanza di alimentazione di rete Verificare la presenza della tensione alimentazione • • Dimmer impostato a 0 Incrementare i valori del canale dimmer • • Il proiettore non illumina LED difettoso/i Sostituire scheda LED •...
Page 20
All rights reserved by Music & Lights S.r.l. No part of this instruction manual may be reproduced in any form or by any means for any commercial use. In order to improve the quality of products, Music&Lights S.r.l. reserves the right to modify the characteristics stated in this instruction manual at any time and without prior notice.
Page 21
3. 12 DMX control 4 Maintenance 4. 1 Maintenance and cleaning the unit 4. 2 Fuse replacement 4. 3 Troubleshooting 5 Appendix 5. 1 Exploded view Warranty • EVO190E Packing content • Mount bracket • Power cord • User manual...
EVO 190E WARNING! Before carrying out any operations with the unit, carefully read this instruction manual and keep it with cure for future reference. It contains important information about the installation, usage and maintenance of the unit. SAFETY General instruction • The products referred to in this manual conform to the European Community Directives and are there- fore marked with .
EVO 190E GENERAL INFORMATION Shipments and claims The goods are sold “ex works” and always travel at the risk and danger of the distributor. Eventual dam- age will have to be claimed to the freight forwarder. Any claim for broken packs will have to be forwarded within 8 days from the reception of the goods.
LED source. Light source is generated by an array of 19x10W LEDs, guaranteeing a highly uniform projection (with no pixels or dots) calibrated at same colour temperature. Design of EVO190E makes it fit properly in studio applications, theaters, events, architectural and in environments having limited power supplies.
EVO 190E 1.3 OPERATING ELEMENTS AND CONNECTIONS MENU ENTER DOWN Rear view Fig.1 1. MOUNTING BRACKET 8. POWER IN (Neutrik connector) for connection 2. LOCKING KNOB for the mounting bracket. to a socket (100-240V~/50-60Hz) via the 3. SHUTTER supplied mains cable 4.
2.1 MOUNTING EVO190E may be set up on a solid and even surface. The unit can also be mounted upside down to a cross arm. For fixing, stable mounting clips are required. The mounting place must be of sufficient stability and be able to support a weight of 10 times of the unit’s weight.
EVO 190E - 3 - FUNCTIONS AND SETTINGS 3.1 OPERATION Connect the supplied main cable to a socket (100-240 VAC-50/60 Hz). Then the unit is ready for operation and can be operated via a DMX controller or it independently performs its show program in succession. To switch off, disconnect the mains plug from the socket.
EVO 190E 3.3 MENU STRUCTURE MAIN FUNCTION SELECTION SUB-SELECTION SUB-SELECTION DESCRIPTION Dimmer d.000 - d.100 Manual control the intensity of the fixture DMX/Slave To select the operating mode of the fixture SLAV DMX Address ADDR d001 - d512 DMX starting address selection Set the Key lock (password mode) Dimming curve off Dim1...
EVO 190E 3.4 DIMMER MODE This mode allows the user to manually control the intensity of the fixture: • Press the button MENU so many times until shows [DIM], and press the button ENTER to confirm. • Press the button UP/DOWN to select [Fix c] then press ENTER to confirm. • Using UP/DOWN button, select the desired value [d.000 - d.100] • Press ENTER button to confirm.
EVO 190E PERF Enter to mode [PERF] you can set the performance characteristics of the fixture: - [LIVE] mode is the default mode which balances the requirements of output and noise. - [STDO] mode maintains extremely low noise at all times and operates at a moderated power level. - [POWR] mode operates at high power for long periods of time without making considerations for noise levels.
• After the setting value is automatically saved. To able to operate the EVO190E with a light controller, adjust the DMX start address for the first a DMX channel. If e. g. address 33 on the controller is provided for controlling the function of the first DMX channel, adjust the start address 33 on the EVO190E.
EVO 190E 3.10 CONNECTION OF THE DMX LINE DMX connection employs standard XLR connectors. Use shielded pair-twisted cables with 120Ω imped- ance and low capacity. The following diagram shows the connection mode: DMX - INPUT DMX - OUTPUT XLR plug XLR socket Pin1 : GND - Shield Pin2 : - Negative...
EVO 190E 3.12 DMX CONTROL CH Function in UNO mode Value DIMMER 0% - 100% 000 - 255 CH Function in DOS mode Value DIMMER 0% - 100% 000 - 255 FINE DIMMER 0% - 100% 000 - 255 STD.P CH Function in STD.P mode Value DIMMER...
EVO 190E - 4 - MAINTENANCE 4.1 MAINTENANCE AND CLEANING THE UNIT • Make sure the area below the installation place is free from unwanted persons during setup. • Switch off the unit, unplug the main cable and wait until the unit has cooled down. • All screws used for installing the device and any of its parts should be tightly fastened and should not be corroded.
EVO 190E 4.3 TROUBLESHOOTING Problems Possible causes Checks and remedies No mains supply Check the power supply voltage • • Dimmer fader set to 0 Increase the value of the dimmer channels • • Fixture does not light up Faulty LED Replace the LED board •...