Control Leds; Test The Network Connectivity - TP-Link Archer MR500 User Manual

Chapter 12
12 2

Control LEDs

The router's LEDs indicate router's activities and status. You can turn on or turn off the
LEDs as you need.
• To turn off LEDs:
1. Visit http://tplinkmodem.net, and log in with the password or your TP-Link ID.
2. Go to Advanced >
3. Disable LED Status.
• To turn off LEDs during the specified period :
1. Visit http://tplinkmodem.net, and log in with the password or your TP-Link ID.
2. Go to Advanced >
3. Tick the Night Mode
4. Specify a time period in the
this period.
Note: Once Night Mode is enabled, the LEDs will be off during the specified period everyday without affecting the
router's performance.
12 3

Test the Network Connectivity

Diagnostics feature helps you run diagnostic test and troubleshoot your network
connectivity problems.
1. Visit http://tplinkmodem.net, and log in with the password or your TP-Link ID.
2. Go to Advanced >
3. Click the Start button to test the Internet connection of the router.
System Tools > LED Control
System Tools > LED Control
checkbox.
LED Off Time
System Tools > Diagnostic
Administrate Your Network
page.
page.
as needed, and the LEDs will be off during
page.
70