Specify The 6Rd Tunnel With Parameters Provided By Your Isp; Test Internet Connectivity - TP-Link Archer MR500 User Manual

Chapter 4
Now you can visit the IPv6 websites with the 6to4 tunnel.
Note: Still not being able to access IPv6 resources means that not any 6to4 public server was found in your network.
You can contact your ISP to sign up for IPv6 connection service.
4 3 2

Specify the 6rd Tunnel with Parameters Provided by Your ISP

I want to:
Specify the 6rd tunnel with the parameters provided by my 6rd tunnel service provider.
How can I do that?
1 Visit http://tplinkmodem.net, and log in with the password you set for the router.
2 Go to Advanced
3 Tick the check box, select
connection from the drop-down list.
4 According to the parameters provided by your ISP, choose
parameters are needed if you choose Manual.
5 Click Save.
Note:
If there is no available WAN connection to choose, make sure you have connected to the internet and the
connection type is not Bridge.
Done!
Now you can visit the IPv6 websites with the 6rd tunnel.
Tips: The way to set up DS-Lite tunnel is similar to that of 6rd tunnel. If you are provided with an IPv6-only WAN
connection and have signed up for DS-Lite tunnel service, specify the DS-Lite tunnel by referring to the steps above.
4 4

Test Internet Connectivity

After manually set up the internet connection, you need to know the internet connectivity.
The router provides a diagnostic tool to help you locate the malfunction.
> Network > IPv6 Tunnel.
6rd as the tunneling mechanism and select a WAN
Set Up Internet Connections
Auto or Manual. More
16