Chapter 15
15 2
Control LEDs
The router's LEDs indicate router's activities and status. You can turn on or turn off the
LEDs either from the web management page or by pressing the LED button.
1. Visit http://tplinkmodem.net, and log in with the account you set for the router.
2. Go to
Advanced
>
3. Check the box to enable
4. Specify a time period in the
5. Click Save, and then the LEDs will be off during this period.
15 3
Update the Firmware
TP-Link is dedicated to improving product features, giving you a better network
experience.
We will inform you through the web management page if there's any update firmware
available for your router. The latest firmware can also be downloaded from the
page of our website
Note:
1. Make sure that you have a stable connection between the router and your computer. It is NOT recommended to upgrade the
firmware wirelessly.
2. Make sure you remove any USB storage device connected to the router before the firmware upgrade to prevent data loss.
3. Back up your router configuration before upgrading the firmware.
4. Do NOT turn off the router during the firmware upgrade.
System Tools
>
LED
Night
Mode.
Night Mode Period
www.tp-link.com
for free.
Control.
as needed.
Administrate Your Network
Support
97