Use Wps For Wireless Connection - TP-Link Archer MR500 User Manual

Chapter 11
11 5 2

Use WPS for Wireless Connection

You can use WPS feature to add a new wireless device to your existing network quickly.
Method 1 Use the Wi-Fi Protected Setup Button
Use this method if your client device has a Wi-Fi Protected Setup button.
1 Press the WPS/RESET button on the back panel of the router for 1 second.
Note:
You can also use the Push button on the web management page. Go to
Start WPS button on the screen.
2 Press the WPS button of the client device within two minutes.
3 The Wi-Fi LED flashes for about two minutes during the WPS process.
4 When the Wi-Fi LED is on, the client device has successfully connected to the
router.
Method 2 Enter the client device's PIN on the router
1 Visit http://tplinkmodem.net, and log in with the password or your TP-Link ID.
2 Go to Advanced
3 Select Method Two--PIN
> Wireless > WPS page.
and select Client's PIN
Specify Your Network Settings
Advanced > Wireless > WPS
radio button.
page and click the
54