Control Leds; Test The Network Connectivity - TP-Link Archer AX3000 User Manual

Chapter 13
3. Select the correct
time zone.
4. Click Save.

13. 2. Control LEDs

The router's LEDs indicate router's activities and status. You can turn on or turn off the
LEDs either from the web management page or by pressing the LED button.
1. Visit http://tplinkwifi.net, and log in with your TP-Link ID or the password you set for
the router.
2. Go to Advanced >
• To control LED:
Toggle on LED Status
• To enable Night Mode:
1. Tick the Night Mode
2. Specify a time period in the
this period.
3. Click Save.

13. 3. Test the Network Connectivity

Diagnostics is used to test the connectivity between the router and the host or other
network devices.
End date and time when daylight saving time ends at your local
System Tools > LED
to turn on the LED while toggle off to turn off the LED.
checkbox.
LED Off Time
Control.
as needed, and the LEDs will be off during
Manage the Router
81