Table of Contents
Advertisement
3. Toggle on
Traffic
Statistics List
section.
Click
Refresh
to update the statistic information on the page.
Click
Reset All
to reset all statistic values in the list to zero.
Click
Delete All
Click
to reset the statistic information of the specific device.
Click
to delete the specific device item in the list.
11. 11. Control LEDs
The router's LEDs indicate router's activities and status. You can turn on or turn off the
LEDs either from the web management page or by pressing the LED button.
To turn on or off the LEDs:
¾
• Press the LED button on the router (if available) about 2 seconds to turn on or off the
LEDs.
• Visit http://tplinkwifi.net, and log in with your TP-Link ID or the password you set for
the router. Click the
¾ To turn off LEDs during Night Mode Period:
1 ) Visit http://tplinkwifi.net, and log in with your TP-Link ID or the password you set
for the router.
2 ) Go to
Advanced
3 ) In the
LED Control
4 ) Specify a time period in the
off during this period.
5 ) Click Save.
Statistics, and then you can monitor the traffic statistics in
to delete all statistic information in the list.
LED
icon in the top right corner of the page.
>
System Tools
section, check the box for
Night Mode Period
>
System
Parameters.
Enable Night
as needed, and the LEDs will be
Traffic
Mode.
68
Advertisement
Table of Contents
